1.Products Introduction
Product name: FN-1 new medical operating patient bed
Specifications: Dimensions: L2200×W1010×H500mm;
Bed surface board: L1950×W830mm
2. Product Features:
Backboard adjustment 70°±5°, leg adjustment 45°±5°; European-style four small guardrails, up and down structure; luxurious central control casters, with locking, free two-stage central control locking device; bed plate adopts 1.5mm cold rolling The steel plate is stamped and formed at one time, and the multi-hole design has good anti-skid and air permeability; the load-bearing capacity of the bed is not less than 200KG; the lower leg plate can be adjusted in 2 sections;
Technical Parameters:
1. The frame of the bed body is welded by 80*40*1.5 formed square pipes, and advanced robot welding technology is adopted. The welding quality is high-quality, and the bed body is firm and can carry ≥550kg;
2. Bed surface: 1.5mm cold rolled steel plate. It is punched into a concave shape and has a multi-hole design for easy ventilation and anti-slip function.
3. The bed body is made of Akzo Nobel environmentally friendly antibacterial powder electrostatic spraying, which has the characteristics of anti-corrosion and rust prevention, and beautiful appearance.
4. The headboard and footboard of the bed are made of ABS engineering plastic in one blow molding. The hanging design is easy to disassemble, seamlessly made, stable and reliable, and easy to disassemble. There is a patient information card slot on the outside of the footboard;
5. European-style four-small ABS guardrail design, using a damper device to control speed and noise, can be hidden under the bed panel and flush with the bed panel.
6. Original German TENTE imported double-sided casters, diameter 125mm, with locking, free two-stage central control locking device; high-stability linkage system, silent, corrosion-resistant, high braking force, stable and safe;
7. Equipped with ABS folding hand crank, the screw rod is made of 45# steel, and is formed by a special rolling machine. The wire mouth is smooth and easy to operate. The mother wire is made of ductile iron. The screw rod has a two-way neutral protection device, which is safe and durable. .
8. Each of the four corners of the bed has an anti-collision wheel and a drip rod socket to protect the bed and make it easy to use.
3. Main parameter
4.Certificate (ISO9001 CE FDA TUV)
5.Company Strength
GRAND Medical Group is the merged medical manufacture, (former factory is YUDA), with the former factories (YUDA) and the third investment, Grand now is the largest medical manufacture in North China. GRAND are focused on the medical equipments, hospital furniture, surgical instruments and ICU monitor equipments production and technical research. We have 38 workshops, with more than 480, 000 square meters. The factory founded in 1992, started from hospital furniture, hence we accumulated rich medical industrial experience. We mainly produce surgical equipment, like: Operating lamp, operating table, and medical pendant, we also produce hospital furniture, like: Hospital bed and medical cart, medical trolley. And the third factories invested ICU equipment: ECG, monitor, anesthesia machine, ultrasound machine. In 2020 Antivirus, Grand put into production of surgical masks and air sterile machine. Grand Medical group produce different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
FAQ
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There's no minimum quantity
Product name: FN-1 new medical operating patient bed
Specifications: Dimensions: L2200×W1010×H500mm;
Bed surface board: L1950×W830mm
2. Product Features:
Backboard adjustment 70°±5°, leg adjustment 45°±5°; European-style four small guardrails, up and down structure; luxurious central control casters, with locking, free two-stage central control locking device; bed plate adopts 1.5mm cold rolling The steel plate is stamped and formed at one time, and the multi-hole design has good anti-skid and air permeability; the load-bearing capacity of the bed is not less than 200KG; the lower leg plate can be adjusted in 2 sections;
Technical Parameters:
1. The frame of the bed body is welded by 80*40*1.5 formed square pipes, and advanced robot welding technology is adopted. The welding quality is high-quality, and the bed body is firm and can carry ≥550kg;
2. Bed surface: 1.5mm cold rolled steel plate. It is punched into a concave shape and has a multi-hole design for easy ventilation and anti-slip function.
3. The bed body is made of Akzo Nobel environmentally friendly antibacterial powder electrostatic spraying, which has the characteristics of anti-corrosion and rust prevention, and beautiful appearance.
4. The headboard and footboard of the bed are made of ABS engineering plastic in one blow molding. The hanging design is easy to disassemble, seamlessly made, stable and reliable, and easy to disassemble. There is a patient information card slot on the outside of the footboard;
5. European-style four-small ABS guardrail design, using a damper device to control speed and noise, can be hidden under the bed panel and flush with the bed panel.
6. Original German TENTE imported double-sided casters, diameter 125mm, with locking, free two-stage central control locking device; high-stability linkage system, silent, corrosion-resistant, high braking force, stable and safe;
7. Equipped with ABS folding hand crank, the screw rod is made of 45# steel, and is formed by a special rolling machine. The wire mouth is smooth and easy to operate. The mother wire is made of ductile iron. The screw rod has a two-way neutral protection device, which is safe and durable. .
8. Each of the four corners of the bed has an anti-collision wheel and a drip rod socket to protect the bed and make it easy to use.
3. Main parameter
| Item | Parameters | ||
| Basic size | bed surface | length | 1950mm |
| Width | 830mm | ||
| Overall size | length | 2200mm | |
| Width | 1010mm | ||
| Height (from bed surface to floor) | 500mm | ||
| Back adjustment | 0°~ 70° | ||
| Knee adjustment | 0°~ 45° | ||
| Safe dynamic load | 200kg | ||
| Function and configuration | can realize movement | Back lift | |
| Knee lift | |||
| Drainage bag hooks | on both sides of the bed, a total of four | ||
| Drip stick socket | F:2,H:2 | ||
| Casters | 125mm diameter central control caster system | ||
| Main materials | bed board, frame, | high-quality cold-rolled steel plate (antibacterial powder coating) | |
| Head/foot board, guardrail | polyethylene resin molding | ||
| Other | drip rod | optional | |
| Power lifting rod | optional | ||
| Mattress | optional | ||
| Dining table | optional(over-table dining table/hanging dining table) | ||
| Oxygen cylinder rack | optional | ||
4.Certificate (ISO9001 CE FDA TUV)
5.Company Strength
GRAND Medical Group is the merged medical manufacture, (former factory is YUDA), with the former factories (YUDA) and the third investment, Grand now is the largest medical manufacture in North China. GRAND are focused on the medical equipments, hospital furniture, surgical instruments and ICU monitor equipments production and technical research. We have 38 workshops, with more than 480, 000 square meters. The factory founded in 1992, started from hospital furniture, hence we accumulated rich medical industrial experience. We mainly produce surgical equipment, like: Operating lamp, operating table, and medical pendant, we also produce hospital furniture, like: Hospital bed and medical cart, medical trolley. And the third factories invested ICU equipment: ECG, monitor, anesthesia machine, ultrasound machine. In 2020 Antivirus, Grand put into production of surgical masks and air sterile machine. Grand Medical group produce different kinds of products. High quality and favorable price. We′re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.
FAQ
Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There's no minimum quantity